How to use USB flash as additional RAM in Windows Vista

Reasons why you want to upgradezi RAM-Street PC-s endowment are enough, But there are as many reasons for this delay upgrade. First, lack of money, then lack of time, after, most likely, memory shorten :D. Sa presupunem, of exemplu, vrei know about testezi or aplicatie wild one joc new, but they move slowly annoying configuration to act it out computer. Something extra RAM would not hurt you in such times, one, although you're thinking about buying another memoirs, Dupa ce inchizi PC-ul uiti. In fact, game will not run better just thought you  upgradezi RAM ul.

For users Windows Vista there is a metoda Simpla of the increase system performance and to enjoy a higher speed of its. ReadyBoost this feature is an option OS (View), through which users can use a regular USB stick as extra memory. But, since it is not enough to USB flash conectam the computer for the system to become more Sprint instantaneous, must do some specific settings, explicate in continuare:

1. Conectati USB flash-ul the computer (first AutoPlay dezactivati), then right click on it and select Properties.

2. In Properties dati click pe tab-ul ReadyBoost si selectati Do not use this device, Apoi click data eg OK and disconnect the USB stick from the computer

3. Open Registry Editor (Run->regedit) and follows the path HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\EMDgmt. In panoul din Stanga (sub EMDgmt) or to list USB devices which were connected to the computer when the system was installed. One of those devices is USB flash your. Select it (un singur click) then change these in the right pane:

• click-dreapta->Modify the entry Device Status, change its value in 2, Apoi by clicking eg OK
• modification valorile intrarilor ReadSpeedKBs one WriteSpeedKBs in 1000.
• inchide regedit.

4. Reconnect the USB to the computer. Mergeti in Properties->ReadyBoost si selectati Use this device. Your system will behave as if they have received Portie buna RAM in most. Enjoy! :D