How to use a USB flash as additional RAM in Windows Vista

Reasons why you want to upgradezi RAM-st PC-lot's of equipment are, But there are as many reasons for this delay upgrade. First, lack of money, then lack of time, after, most likely, memory shorten :D. Sa presupunem, of exemplu, want to testezi or aplicatie a sau joc new, but it moves slowly annoying configuration current computer. Something extra RAM would not hurt you in such moments, one, Although you're thinking about buying another memoirs, Dupa ce inchizi PC-ul uiti. In fact, game will not run more than just thought you  RAM upgrade.

For users Windows Vista there is a simple method to increase system performance and to enjoy it a higher speed. ReadyBoost this feature is an option OS (View), through which users can use a USB memory stick used as additional. But, Given that it is not enough to connect me the computer a USB flash for the system to become more Sprint instantaneous, must be made several specific settings, further explained:

1. Connect the computer's USB (first disable AutoPlay), then right click on it and select Properties.

2. In Properties eg ul-click Data Table ReadyBoost you selecta Do not use this device, Click Apoi data eg OK and disconnect the USB stick from the computer

3. Open Registry Editor (Run->regedit) and follow the path HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\EMDgmt. In the left panel (sub EMDgmt) or to USB devices list which were connected to the computer when the system was installed. One of those devices is USB flash your. Select it (Singur a click) then change these in the right pane:

• click-dreapta->Modify on entry Device Status, change its value in 2, eg by clicking Apoi OK
• change input values ReadSpeedKBs one WriteSpeedKBs in 1000.
• inchide regedit.

4. Reconnects to the computer's USB. Merget in Properties->ReadyBoost you selecta Use this device. Your system will behave as if they have received portie Buna RAM in most. Enjoy! :D